|Title||Comments Due By|
|Template||Template for Submitting Public Review Comments||NA|
|IAPMO IGC 91-2019||Electrical or High Density Magnetic Anti-Scale or Water Conditioning Appliance||2019-08-03|
|IAPMO IGC 100-2019||Copper Wrought Solder-Filled Joint Fittings||2019-08-03|
|IAPMO IGC 119-2019||Water Treatment Equipment Drain Connectors||2019-08-03|
|IAPMO IGC 178-2019||Gravity Fed Water Distribution Manifolds for Trap Primers||2019-08-03|
|IAPMO IGC 225-2019||Lavatory or Sink Trap with or without Removable Filter or Cleaning Device||2019-08-03|
|IAPMO IGC 301-2019||Flexible Continuous Wastes for Lavatories and Sinks||2019-08-03|
|IAPMO IGC 348-2019||Plastic Push Fit Tubular Fittings||2019-08-03|
|IAPMO IGC 354-2019||Pipe Lining Systems Employing Polyethylene Terephthalate (PET)||2019-08-03|
|IAPMO IGC 356-2019||Drain Plates for Water Closets||2019-08-03|
|IAPMO IGC 360-2019||Compression Fittings for Water Supply and Gas Piping Applications||2019-08-03|
|IAPMO IGC 361-2019||Continuous Flexible Self-Plunging Waste Pipes||2019-08-03|
Note: In order to be considered, comments must be submitted using the template above. Comments not submitted using the template above will not be considered.
Input from stakeholders (e.g., inspection officials, product manufacturers, engineering professionals, and the public at large) is an important part of the IAPMO standards development process. Proposals for new IAPMO industry standards or changes to existing industry standards are posted on this website for 20 days prior to publication
All stakeholders are invited to submit comments to the IAPMO Standards Review Committee (SRC) regarding the posted documents. The SRC will review ALL comments submitted and will address any substantiated health or safety issues raised, before the new or revised standards are published.
Comments should be submitted by e-mail to standards@IAPMOstandards.org, using the template above. All comments must include the following:
Commenters will be notified regarding the date and time of the SRC meeting at which the comments will be considered. Commenters are encouraged to attend the meeting to participate in the discussion of their comments.
Comments on proposed revisions must relate to the revisions themselves. Commenters wishing to submit changes to other sections not part of the proposed revisions will be asked to resubmit their comments as a separate proposed change to the standard.
This forum provides an expedited opportunity for all IAPMO members and other stakeholders to give valuable input to the SRC without having to wait for IAPMO’s Annual Conference. It is in this way that all of us, working together, can continue to develop some of the best standards in the plumbing and mechanical industry.
Check this site monthly as proposals for new standards and changes to existing standards are added regularly. Click on the number designation of the documents below to open the PDF files with the proposals. If you wish to receive a notification e-mail when standards are posted on this site, please send a request to standards@IAPMOstandards.org.