Plumbing Products

• SNI 03-0797-2006 - Water closet
• SNI 8153:2015 - Plumbing system and its product
• SNI 06-0084-2002 - PVC pipe for drinking water line
• SNI 06-0135-1987 - PVC pipe fittings for drinking water line
• SNI 06-0162-1987 - PVC pipe for waste water inside and outside buildings
• SNI 06-0178-1987 - PVC pipe fittings for waste water inside and outside buildings
• SNI 06-4829-2015 - Plastic polyethylene (PE) pipes and fittings for drinking water supply system
• SNI 2547:2008 - Water meter
• SNI ISO 15874 - Polypropylene pipes for installation of cold and hot water
• SNI 7276:2014 - Plastic –cylinder vertical Water tank - PE
• SNI 8456-2017 - Rainwater Infiltration Wells and Trenches
• UPC Standard (America and Canada Standard)
• Saudi Standard – Western and eastern closets
• SNI 8456-2017 - Rainwater Infiltration Wells and Trenches
• Philippines National Standard (PNS)

Building Materials

• SNI ISO 13006:2010 - Floor tile
• SNI 15-0047-2005 - Flat glass
• SNI 15-0048-2005 - Tempered safety glass for motor vehicle
• SNI 15-1326-2005 - Laminated glass for motor vehicle
• SNI 15-4756-1998 - Mirror glass sheet for general use
• SNI ISO 21690:2013 - Glass for building - glass block
• SNI ISO 25537:2011 - Glass for building : silver plated sheet glass mirror
• SNI 03-6384-2000 - Gypsum
• SNI 3564:2014 - Wall Paints
• SNI 8011:2014 - Decorative paints
• SNI 0068:2013 - Carbon steel pipe for general constructions
• SNI 0139:2008 - Threaded maleable cast iron black pipe connector
• SNI 0039:2013 - Water pipes with or without zinc coating
• SNI 15-3758-2004 - Masonry cement
• SNI 2049:2015 - Portland cement
• SNI 15-3500-2004 - Mixed portland cement
• SNI 7064:2014 - Portland composite cement
• SNI 0302:2014 - Portland pozolan cement
• SNI 07-0052-2006 - Steel Canal profile from the hot rolling mill process
• SNI 07-0329-2005 - The I-beam profile steel from the hot rolled process
• SNI 07-2054-2006 - Elbow steel profile from hot rolled process
• SNI 07-7178-2006 - Wide Flange (WF) beam Steel profile from hot rolled process
• SNI 2610-2011 - Steel H-beam profile from the process of hot rolled or welding 

• SNI 07-2052-2017 - Concrete reinforcement steel

• SNI 07-0065-2002 - Reinforced concrete steel from reroiling
• SNI 07-0954-2005 - Concrete reinforcement steel in the form of rolls
• SNI 7614-2010 - Steel bar for general purposes
• SNI 8299-2017 - Flat cement board non asbestos
• SNI 1027:2015 - Flat cement sheet
• SNI 8665:2018 - Water-Based Leakproof Paint
• SNI 8293:2017 - Cold Plastics Specifications for Road Markings
• SNI 8399:2017 - Light Steel Frame Profile
• SNI 0096-2007 - Concrete Roof Tiles
• SNI 1154:2016 - Seven Twisted Steel Wire without Twisted For Precast Concrete Construction (PC Strand/KBjP-P7)
• SNI 1155:2016 - Layered steel wire for concrete construction (PC wire/KBjP)
• SNI 7701:2016 - Tempered steel wire for concrete construction (PC bar/KBjP-Q)
• SNI 07-0040-2006 - Low Carbon Steel Wire
• SNI 07-0053-2006 - Low Carbon Steel Wire Bars
• SNI 07-1579-1989 - Carbon Steel and Alloy Steel Rods for Cold Working 
• SNI 8884.1&2:2020 - Plastic piping system for gas dispensing 
• SNI 8294:2016 - Paint of the ballast tank of the ship dan SNI 502:2016 Anti-Fouling Paint For Boat Hulls Under Water Lines
• SNI 19-4509-1996 - Plastic Bags for Plant Breeding

Other Product 

• SNI 7275:2008 - Ceramic tableware
• SNI 8752:2019 - Cookware
• SNI 8753:2019 - Flatware
• SNI 07-0601-2006 - Sheet steel, plates and hot rolled rolls (Bj P)
• SNI 07-2053-2006 - Sheet steel  Zinc coated (Bj LS)
• SNI 07-3567-2006 - Sheet steel and cold rolled rolls (Bj D)
• SNI 4096:2007 - Sheet and roll Steel - aluminum-zinc alloy coated  (Bj.L AS)
• SNI ISO 4586-3:2017 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
• SNI ISO 4586-4:2017 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
• SNI ISO 4586-7:2017 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 7: Classification and specifications for design laminates
• SNI 7531:2009 - Water treatment equipment with ultra membrane
• SNI 8679-1&2:2018 - Waterwheel for fish farming
• SNI 7033:2020 - Specification of hot-dip galvanization (Hot dip galvanized) on iron and steel products
• SNI 8752&8753:2020 – Cookware and Flatware
• SNI 7504:2011 - Material specifications fiberglass reinforced plastic water treatment plant unit
• SNI 8640:2018 - Specifications of lightweight bricks for wall